Connecting your Sharp MX-3071 copier to a wireless network enhances office efficiency by allowing cable-free printing and scanning. Follow this easy guide to set up your copier using Wireless (Infrastructure Mode).

A. Access Administrator Settings

1. Power On the Copier
   Make sure your Sharp MX-3071 is turned on and ready to use.
2. Open Admin Mode
   Tap the Home button on the touchscreen.
   Select the Settings icon and go to System Settings.
3. Log In as Administrator
   Enter the admin username: admin.
   Enter the password: admin.

B. Navigate to Network Settings

1. Find Network Settings
   In System Settings, scroll down and select Network Settings.
2. Select Wireless LAN Settings
   Tap on Wireless LAN Settings to access the wireless setup options.

C. Enable Wireless LAN

1. Activate Wireless LAN
   Ensure that Wireless LAN is set to Enable. This activates the wireless capabilities of the copier.
   If the option is greyed out, your copier may not have a wireless network card installed. Consult your supplier or administrator if needed.

D. Set Wireless Mode to Infrastructure

1. Choose Wireless (Infrastructure Mode)
   In the Wireless LAN Settings, select Wireless (Infrastructure Mode). This mode allows the copier to connect to your office Wi-Fi network through a router.

E. Search for Available Wi-Fi Networks

1. Scan for Networks
   The copier will automatically search for available wireless networks. Wait a moment while it completes the scan.
2. Select Your Wi-Fi Network
   Choose your office Wi-Fi network (SSID) from the list displayed.

F. Enter the Wi-Fi Password

1. Input the Password
   When prompted, enter your Wi-Fi password using the on-screen keyboard.
2. Confirm the Connection
   Double-check the password for accuracy and press OK to connect.

G. Verify the Connection

1. Check Connection Status
   The copier will try to connect to the wireless network. A confirmation message should appear if the connection is successful.
   Go to Network Status in the menu to check if an IP address has been assigned.
2. Test the Connection
   Send a test print from a computer or mobile device connected to the same Wi-Fi network to ensure everything is working.

By following these steps, you can successfully connect your Sharp MX-3071 to a wireless network using Wireless (Infrastructure Mode). This will streamline printing and scanning in your office, enhancing overall productivity.

For assistance or additional support, reach out to Dynasty Office Solutions, your trusted partner in Sharp copier solutions.